Sterilisation & pasteurisation

Regulation (EC) No 1069/2009 divides substrates into three categories. A separate pre-treatment of the substances is necessary, depending on their classification.

Abattoir waste requires 30 minutes of pressure sterilisation with approx. 2–3 bar overpressure at a temperature of 133 °C. Moreover, the sterilisation substances must be subjected to pre-treatment and heating or cooling. The overpressure in the sterilisation container necessitates the installation of various safety engineering facilities.

Pasteurisation is sufficient for the treatment of bio-waste, for instance. The pasteurisation takes place at 70 °C. It does not require a pressurised state and must be performed over 1 hour.

ENSPAR provides individual components and complete systems with measurement and control technology for both of these methods.

Biogas plant technology

Sectors

Profitable recycling of residues

Tons of organic residues that release methane during decomposition are accumulated in agriculture, food production and wastewater treatment. This gas can contribute significantly to climate change if it is emitted unchecked into the atmosphere.

Plant concepts

Individual and tailored

You would like to exploit the energy contained in the biowaste or sewage sludge accumulated in your municipality? You have organic production residue that can be used as a raw material to produce energy? You possess quantities of farm/liquid manure?

Biogas plant technologies

Components for your biogas plant – Quality made in Germany

From plant control units to the tent roof, exhaust air treatment to equipment for preliminary tanks – ENSPAR Biogas has an extensive range that covers all areas of biogas technology to deliver smart, needs-based solutions for specific locations.

ENSPAR Biogas GmbH